China International Defence Electronics Exhibition(CIDEX) is the most prestigious defence electronics exhibition in China. CIDEX is supported by the Equipment Development Department of Central Military Commission, and it is organized by China Electronics Technology Group Corporation(CETC) and China Electronics Corporation(CEC). Since 1998, CIDEX has been successfully held for 11 sessions, gathering attention from industry leaders, experts, and scholars from around the world. For over 20 years, CIDEX has striven to showcase the highest standard in Chinese defence electronics industry, and will continually create business opportunities for companies around the world. http://www.cidexshow.com/
ARCUS is internationally recognized center of competence in military engineering. It specializes in development, production and supply of defense products, including Ammunition, Fuzes, Firearms and Grenade Launchers. ARCUS has 50 years of tradition in the research, development and manufacturing of defence-related products.
According to the Order No. 293 dated 17 October 1991 of the Director of Production Republican Unitary Enterprise Minsk Wheel Tractor Plant of BelautoMAZ Production Association, Research and Production Enterprise VOLATAVTO was established. In 2001, it was transformed into research and production subsidiary enterprise VOLATAVTO, and then into VOLATAVTO JSC in 2009. The main activity of the company is R&D on mobile rapidly deployable platforms fitted with mast lifting devices and designed for deployment of weapons and military equipment, as well as multiple launch rocket systems. In 2013, VOLATAVTO was reorganised after the Slutsk Crane Repair Plant had been affiliated to it. After the reorganisation, the total number of employees was more than 200 people. The company develops and delivers products to Belarusian and Russian customers in order to fulfill the state defence orders of both countries. Over the past seven years, VOLATAVTO JSC has delivered more than 110 mobile platforms, where more than 60 platforms have been delivered to ten Russian partners in the framework of military-technical cooperation. The output products are protected by nine patents of the Republic of Belarus and eight patents of the Eurasian Patent Organisation (EAPO) for inventions, useful models and production prototypes. The Belarusian State Military […]
Tekhnika Svyazi JSC is one of the oldest Belarusian defence company. The enterprise was founded in 1873, in 2006 it was subordinated to the State Military Industrial Committee. The enterprise specialises in the production of modern radio communication and telecommunication equipment. Main activity areas: products for uniformed services: HF and VHF transceivers for civil and military use, DMR-standard radio stations, emergency radio stations, protective helmets, active hearing protection headsets GSSH-01 products for communication lines installation and fibre optic equipment: optical cross cases, telecommunication cabinets and racks, distribution telephone equipment, a cable localiser, signal posts manufacturing and machining of parts, metalworking and electroplating consumer goods Tekhnika Svyazi JSC is an enterprise with a full production cycle for the manufacture of radio communication equipment, starting from the production of individual parts to the assembly, installation and testing of finished products. The production of the ASH-4 and the BSHDA onboard wide-range antennas and installed on mobile facilities for operation with transceiving radio engineering devices was launched in 2016. In 2017, the production of the Tucha 902B smoke screen laying system began. In 2017, within the framework of the license agreement with Armokom CJSC (the centre of high-strength materials) the production of protective helmets […]
Since its founding in 1991, State-owned Foreign Trade Unitary Enterprise Belvneshpromservice has become one of the instruments for implementing the state’s transition to a market economy in foreign trade and is part of the Belarusian Chamber of Commerce and Industry. During the formation of the enterprise, the main export goods were armaments and military equipment produced in the former USSR. Nowadays, our company offers the most competitive, state-of-the-art, unique military products of the Belarusian defence industry to the world market. Today, Belvneshpromservice carries out trade and economic cooperation, exporting military and dual-purpose products for the air force, air defence and land forces. The priority export areas: supplies of advanced radar and electronic countermeasures systems, optical and optronic products, special equipment, as well as means for countering terrorism. The company provides a wide range of services for development, manufacture, upgrade and maintenance of military and dual-purpose products, state-of-the-art technologies, as well as personnel training. Belvneshpromservice is actively involved in the financing of R&D on the creation of new types of military equipment. The enterprise has all the necessary state licences for selling armaments, military goods, components, special technological equipment and materials. The accumulated experience in foreign trade of more than 28 […]
State-owned Foreign Trade Unitary Enterprise Belspetsvneshtechnika is the leading enterprise on the territory of the former Soviet Union specialising in export of high-tech products and knowledge-intensive military technologies. The company started its activity since 1995 as a trade enterprise. It mainly focused on formation and expansion of military equipment and armament markets. Over a twenty-year period of its activity, the company managed to establish stable foreign trade relations in more than 30 countries. Today, the company has significantly expanded its capabilities through the introduction of advanced technologies and the development of its own production: from the creation of up-to-date small-arms systems and optronic devices to modern informational support and command and control systems. The successful application of innovative solutions and the introduction of state-of-the-art technologies while creating military products allows the company to dominate on specialised military equipment and armament market, as well as to compete on equal footing with foreign counterparts and even outperform them in terms of quality – reliability – cost ratio. The ample opportunities, stability and reliability of relations with customers are determined by the status of a state enterprise and the high level of professional training of specialists.
Development of Sight systems to be implemented on the armament and military goods. Upgrade of military vehicles in terms of armament implementation. Mathematical and software support for the training of operators and the equipment of firing ranges.
The enterprise was designed for military products and other specialised products (work, services). It was established on 27 May 2009 The main activity areas: the activity in relation to the products for dual-use or other products including manufacture, repair, upgrade, extension of the technical validity and disposal of arms, military and special equipment scientific research activity aimed at creating arms and munitions, spare parts, components, assemblies and equipment for them development and production of different electronic simulators, training systems and firing ground equipment, and in the coming future – the creation of a unified complex (for local computer network) that allows to combine different training systems (firing simulators, ATGM and MANPAD training systems and armoured vehicle simulators) for practicing actions of a section, a company, a battalion provision of satellite services to TV and radio broadcasting channels Aside from this, Precise Electromechanics Factory Republican Production Unitary Enterprise is the main contractor for large-caliber MLRS production projects in the Republic of Belarus.
Peleng JSC is the leading enterprise of the optomechanical and optoelectronic industry in the Republic of Belarus. In 1975, the design department at Minsk Mechanical Works named after S.I. Vavilov (BelOMA) was reorganised into a separate legal entity – Central Designing Bureau Peleng. The design bureau was subordinated to the USSR Ministry of Defence Industry. After the dissolution of the USSR, Peleng was moved under the control of the Ministry of Industry of the Republic of Belarus. In 1994, Peleng went public. In 2004, Peleng JSC joined the family of companies of the Belarusian State Military Industrial Committee. The main activities of Peleng JSC are R&D and the production of optical and optoelectronic systems used in: aerospace optical-electronic equipment forensic and security systems meteorological equipment Peleng is a full production cycle company with its own production facilities (optical, mechanical, assembly, electro-wiring) and final quality control. The company aims at providing a tailored complex solution of the customer’s tasks, and suggests the following stages for work on a project: technical specifications development design activities (initial and engineering design) development of design documentation software development and testing development of operational documentation final product manufacturing and assembly standalone and integrated testing supply and […]
The plant’s history goes back to 12 July 1941 – the day of creation of the 2nd aircraft repair train of the Baltic Fleet Air Force, which passed the battle routes from Leningrad to Koenigsberg and ended the war in the Primorsk Territory in the Far East participating in the defeat of militarist Japan. On 24 December 1956, the enterprise was relocated to the r.s. Bolbasovo. Orsha Aircraft Repair Plant JSC is the leading enterprise in the Republic of Belarus in the sphere of overhaul and modernisation of various modifications of Mi-2, Mi-17 (Mi-17), Mi-24 (Mi-35), Mi-26 helicopters, of removable and fixed equipment, components, units and systems, measuring instruments, as well as test and control equipment, in supplying spare parts to the above helicopters, as well as the IL-76 airplane maintenance and repair. Today, the enterprise has mastered the MODERNISATION programmes of: Mi-2 helicopter into the Mi-2М variant, with installing more powerful and efficient AI-450M engines. Mi-24 helicopter (Mi-35) in the variant of round-the-clock combat use in any weather conditions. Mi-8 helicopter (Mi-17, Mi-171), as well as in “Salon”, “VIP-salon” passenger variants. Mi-8 helicopters in the ambulance, troop-carrying variant and other variants according to the developer’s documentation. Orsha Aircraft Repair […]
OKB TSP Scientific Production Limited Liability Company (OKB TSP SPLLC) is an innovative enterprise, founded in 2002. The main activities of the enterprise are the following: modernisation of weapon systems and military equipment; scientific and technological and defence researches; development and full-scale production of new weapon systems and their components, of dual-use items; development and manufacture of radio-electronic systems, hardware and software packages for systems providing control over troops and weapons. OKB TSP SPLLC has modern research and production facilities that allow the company to carry out R&D and full-scale production. The enterprise has a flexible structure that is adaptive to current tasks, as well as a high scientific and technological potential based on candidates and doctors of science and highly skilled engineering personnel. The enterprise has large experience in the development, serial production and on-time delivery of items to customers. Over 15 years of its existence, the enterprise has taken part in implementing a series of intergovernmental programmes and proved itself as standing partner. The main activities of the company: development, design and production of weapons and military equipment modernisation of weapons and military equipment design and production of dual-purpose electrohydraulic and electromechanical systems development of complex electronic systems […]
Minsk Wheel Tractor Plant JSC (MWTP) trading as VOLAT is one of the world leading manufacturers of special-purpose wheeled chassis and trucks of increased payload and off-road capability. MWTP was founded in 1954 as a special design bureau of Minsk Automobile Plant (MAZ). In 1991, MWTP was withdrawn from MAZ and became an independent entity. MWTP gives its customers a unique opportunity to transport heavy cargo and equipment to the outermost points of the planet. The company has more than 60-years’ experience in design and production, which allows it to create vehicles intended for operation under rough conditions and capable of running on off-road terrain, operating in the temperature range from –50°C to +50°C and transporting cargo of up to 250 tonnes. MWTP is one of the few world automobile manufacturers that can develop from scratch, test and launch series production of vehicles tailored for the individual customer requirements within the shortest possible time. The high quality and performance of VOLAT vehicles are ensured by MWTP’s unique engineering solutions, by using components from leading manufacturers, as well as by modern high technology equipment. VOLAT vehicles and the production process are certified in accordance with the European TÜV ISO 9001 certificate. […]
MNIPI Joint Stock Company was established in 1954. It has been developing and producing special electronic devices and measuring systems for national economic purposes for more than 60 years. Many years of engineering experience in development of special and measuring equipment, the existing technological and scientific facilities, as well as a staff of highly qualified specialists enable the company to produce a wide range of sophisticated high-tech devices and systems. The production line includes more than 20 sophisticated special-purpose products and over 100 measuring systems and devices. The most significant achievements of recent years are: development, production and supply to the Belarusian Defence Ministry of modern information support tools designated for use in the field environment, particularly mobile information centres ITs-2006 and ITs-2006/01, as well as portable information system PIK-2015; development, production and contractual delivery of advanced information security facilities used in communication channels to peculiar customers; development, production and delivery of state-of-the-art electronic instruments and systems, including high-precision calibrators, measurement systems in microelectronics, LCR-metres, electronic frequency metres, voltmetres, oscilloscopes, generators, microwave antennas, megaohmmetres, and other devices, components and spare parts to customers from national economy branches. MNIPI JSC runs a complete range of production processes and equipment required for […]
Minsk Research Institute of Radiomaterials JSC (MNIIRM) has been successfully operating since 1982 in the field of development and production of electronic components for microwave technology based on advanced semiconductors A3B5, constantly expanding the range of services and products. The specialists of the Institute performed more than 210 projects and R&D for more than 50 largest organisations of Belarus and Russia. The work is carried out by skilled personnel. At the same time, original techniques are used, in particular, the methods developed for monitoring and testing microwave components of C-, S-, L-, X-, K-wavelength ranges, micromechanics, and sensor technology. The Institute has the only facility in Belarus for the development and production of optronic products and microwave monolithic integrated circuits (MMICs) with a higher level of integration, sensor technology based on micromechanics. Main activities: development and production of hardware components and functional units of microwave technology of C-, S-, L-, X-, K-wavelength ranges on A3B5 materials (solid-state microwave monolithic integrated circuits, microwave modules) design and manufacture of optronic components, modules based on them development of sensor technology, modules and systems production of gallium arsenide substrates of the “epi-ready” standard, photomasks with a minimum element size of up to 0.6 μm production of medical equipment […]
The origin of the enterprise dates back to 1974 when a special department was set up at the the Science Research Institute of Automation Means in Minsk. Later, the department spun off as Kamerton Design Bureau, which in its turn was transformed, and on 9 March 2006 registered as KB Radar, a research and production unitary enterprise specialising in development and production of radar, electronic warfare and ELINT/SIGINT/COMINT, radio monitoring systems. As from 30 December 2010, KB Radar has the legal status of an open joint-stock company. Radar systems The company designs and produces mobile and stationary solid-state surveillance radars featuring high sensitivity and accuracy of coordinate determination, emission security, short set-up/tear-down time, as well as automatic radars and radar systems for detecting and tracking low-altitude aerial platforms, short-range radars providing additional radar information to radio reconnaissance and electronic warfare means. EW and ELINIT/SIGINT/COMINT systems A family of stations performing radio reconnaissance, direction finding and jamming of modern, including jam-resistant, terrestrial and aerial communication links, as well as radio reconnaissance and jamming systems based on such stations and command posts data has been developed and produced. A great number of counter-UAV assets has been created and continues to be improved. […]
Gomel Design Office Luch JSC (the successor of Gomel Design Office formed by Order No. 429 of 13 July 1972 by the USSR Minister of Radio Industry) was part of a specialised research and production complex of enterprises making radar systems to protect the USSR from a missile attack. The enterprise is developing radar equipment for missile approach warning systems, space monitoring systems, and for missile defence systems in the USSR. Today, Gomel Design Office Luch JSC is the leading enterprise in the development and production of Belarusian antenna-feeder devices (AFD), one of the most important components of any radar station. Within the framework of a joint project with Radar JSC – Managing Company of Radar Systems Holding and other participants developing two-dimensional radar Vostok-D, Gomel Design Office Luch specialists designed and manufactured automatically collapsible and deployable solid-state active antenna system exceeding performance characteristics of the radar 1RL131 (Terek). In 2017, the passive antenna component of the S-range height-finder for the three-dimensional Vostok-3D radar was designed. The performance characteristics of the height-finder antenna allow the Vostok-3D to detect and accurately determine the height and radial velocity of aerial vehicles at ranges up to 360 km. Among the developments of Gomel […]
Display Design Office JSC was founded in 1987. The enterprise specialises in the development and production of multi-purpose video monitors ranging from 6.4″ to 98″, avionic displays, dedicated computers, microdisplay devices for harsh operating conditions, as well as remote-controlled weapon systems. The company is accredited by SCST (the State Committee on Science and Technology) of the Republic of Belarus in association with the National Academy of Sciences of Belarus as a scientific organisation. The main goal of the company’s R&D activity is to create high technology products for solving current issues of the defence industry. The company produces video monitors and computers that can operate at temperatures down to minus degrees Celsius. Such kind of solution became applicable due to the deep LCD ruggedisation technology. The dedicated computers are certified and compatible with OS Astra Linux Special Edition. Display Design Office JSC has been qualified to label its products with a software conformity mark. In 2017, the company presented new types of combat modules. One of them is the ADUNOK-2V equipped with two types of weapon. Another new product is a light remote control platform that is a portable weapon complex for small arms of 5.45 mm caliber. Display Design […]
In November 1958, a Special Design Office was established at Minsk Computing Machines Plant named after G.K. Ordzhonikidze (now, MPOVT JSC), which was reorganised into Computer Research Institute NIIEVM JSC in 1972. Nowadays NIIEVM JSC is one of the oldest enterprises of the Republic of Belarus involved in the development and manufacture of computer equipment. Since 2011 NIIEVM JSC has been a part of Geoinformation Control Systems Holding subordinated to the Belarusian State Military Industrial Committee. The main activities of the enterprise as a part of the holding are as follows: development and production of new types of special and dual-use computer equipment with integrated additional options, special purpose components and nodes applied research of new information security facilities and application of the obtained results into the production of computer equipment modernisation and repair of weapon systems and military and special equipment development and production of industrial automation equipment and modern fare systems Thus, alongside with conducting R&D on the creation of general purpose industrial computers, in recent years specialists of the institute have been developing means of special purpose computer equipment including PCs intended for functioning in severe climatic conditions. The institute holds a license for managing activities on […]
BSVT – New Technologies LLC is a manufacturing company developing and producing optical and optoelectronic sights, observation devices and systems, simulators, navigation equipment, self-propelled robotic systems, small arms for civil and military use, silencers for small arms. The company also deals with the modernisation of military equipment and of short-range air-to-air guided missiles. The aim of the company is to succeed in the field of military and civil developments using advanced technologies. Working on integrated control systems, BSVT – New Technologies LLC uses its own algorithms based on computer-aided learning and neural networks, which allows processing huge amounts of data in real time without human participation. To ensure accurate positioning and control of various products, including guided missiles and ammunition, the company is engaged in the development and production of strapdown inertial positioning systems used in constructing high-precision geoinformation systems for navigational tasks. As a result of fruitful cooperation with leading educational institutions, training systems and complexes, including those with VR headsets, which guarantee full involvement in the learning process, have been developed and successfully implemented. Using the advanced technologies in the field of electronics and video processing, BSVT – New Technologies LLC modernises various missiles and artillery guided projectiles. […]
Beltechexport Company was established on 26 January1993 and became the first official specialised enterprise in Belarus engaged in military-technical projects. Beltechexport Company CJSC (hereinafter – Beltechexport) is an authorised state special exporter and an integral part of the Belarusian military-intustrial complex. From supply specialised military equipment in the local market, the company gradually proceeded with the promotion of Belarusian cutting-edge defence products to foreign markets. Due to the systematic deliberate and well-coordinated work of qualified specialists possessing wide experience of cooperating with foreign partners, the company has mastered armaments market almost on all continents. Thus, Beltechexport has partnership relations with countries of Africa, Asia, Middle East, Latin America, the European Union, North America and Australia, as well as long-term cooperation with many leading world-class companies. The military-technical cooperation of Belarus with dozens of countries has been established and is successfully developing with the direct participation of Beltechexport. To further strengthen its position in the global arms market, along with supplies of the specialised equipment, Beltechexport offers the most advanced solutions: up-to-date and intelligent weapon systems, as well as a wide range of services for personal training, maintenance, warranty servicing and technical support of the supplied equipment, including in the customer’s […]
The history of AGAT–SYSTEM JSC includes more than 30 years of successful work on the market of automation and information technologies. The company uses modern knowledge-intensive technologies to create innovative products that can successfully compete both in the domestic and in foreign markets. AGAT–SYSTEM JSC is engaged in designing, developing and mastering the production of means and systems of communication. It although conducts R&D on the creation of automated information and control systems. The company is involved into development of software for general and special purposes, develops and serially produces technical means and security systems. One of the main achievements of the enterprise is the development and serial production of programmable, multi-purpose, multi-range digital military communication equipment. Among them: a portable VHF P-180 radio station for individual use the family of HF- and VHF-band P-181 radio stations for communication at the tactical command level VHF radio station P-181-50TY, designed for mounting on mobile armoured objects; HF P-181-1000BK radio station for communication of mobile and stationary objects; products of the hardware and software complex for switching and routing digital streams for field communication systems, and computer networking (P-320 router, P-341 modem, P-215 and P-195 switches, TA-10 and TA-11 field phones).
AGAT – Сontrol Systems JSC – Managing Company of Geoinformation Control Systems Holding traces its history back to the Research Institute of Automation Facilities established in 1969. During its evolution, the сompany has gone through all stages of development and application of radio-electronic equipment: from relays and lamps to advanced microelectronic products and created four generations of control facilities and systems. The company’s main activities: products for defenсe (combat geoinformation, including robotic, control systems of all levels of command for the Armed Forces) dual-use products (systems and means of power supplies, industrial computers, navigation and video surveillance systems) products of industrial and technical purposes (automated control system for transport, for technological processes at power facilities and for industrial enterprises); automated information systems for government bodies products and services in the sphere of information security Currently, about 20 countries are using military goods of AGAT – Сontrol Systems JSC – Managing Company of Geoinformation Control Systems Holding. Dozens of modern simulating centres have been created by the company, an automated system of end-to-end design and engineering has been introduced. The company has its own production and testing facilities with modern technological equipment that ensures the manufacture of production prototypes and serial […]
The history of Minsk Electromechanical Plant dates back to 1 December 1952, in accordance with the order of the USSR Ministry of Shipbuilding Industry No. 001293 “On the partial commissioning of Plant No. 864”. Agat – Electromechanical Plant JSC is a part of the Belarusian State Military Industrial Committee and is subordinated to AGAT – Сontrol Systems JSC – Managing Company of Geoinformation Control Systems Holding. The enterprise produces special-purpose equipment for the military and for the law–enforcement agencies of the Republic of Belarus: mobile communication nodes automation equipment for mobile control posts of radiolocation stations automated command posts for air defence missile brigade mobile stations for automated aircraft control mobile communication nodes radio relay stations standard vehicles for the chief officer of the battalion headquarters (gun position officer) special-purpose container-type vans (special-purpose containers) servo units switch cabinets cabinets for thermally-controlled equipment universal masts measuring satellite units (strap-down inertial navigation systems) rack-mounted optical fibre distribution frames Military offices of the Russian and Belarusian Defence Ministries are represented at the enterprise. Furthermore, Agat – Electromechanical Plant JSC is a supplier of sophisticated electrical equipment for the assembly lines at engineering industry. Agat – Electromechanical Plant JSC is currently developing new samples […]
558 ARP JSC is one-of-a-kind in the Republic of Belarus and among the few enterprises in CIS that offers a broad variety of services in overhauling and modernising various types of aircraft. The plant possesses a well-functioning system of work organisation, sufficient facilities, energy systems, unique process equipment, tools and rigging, all types of specifications and technical documentation. Substantial attention is paid to developing service equipment as well as to introducing brand–new technological processes. The main activity area of the plant is overhauling and modernising Su-22, Su-25, Su-27, Su-30, MiG-29, An-2 aircraft and Mi-8 (Mi-17) and Mi-24 (Mi-35). 558 ARP JSC performs the complete repair cycle of airframes and all components, complex upgrading of aircraft, and takes extra preventive measures to boost their reliability. Special consideration in the course of overhaul is given to fault detection using state-of-the-art NDT (magnetic, eddy current, X-ray TV etc.). All materials and parts used in overhaul comply with most rigorous requirements. Three-stage entrance control system and accredited central plant lab serve this purpose. With its high concentration of production capacities and financial resources, 558 ARP JSC is continually striving to enhance the present aircraft overhaul methods, to develop cutting–edge technological processes, to expand their […]
2566 Radioelectronic Armament Repair Plant JSC (REARP) is one of the leading enterprises in repair and modernisation of air defence weapons. The plant has repaired more than 1200 units of military armaments since 1992, including samples of sophisticated air defence weapons: ADMS S-300 PS (PT), S-200 Vega, S-125 Neva (Pechora), S-75, OSA-AKM, 2S6 Tunguska anti-aircraft gun-missile system, radars of different types, mobile height finders PRV-13, PRV-16, ground-based interrogators, measuring stations, diesel electrical stations etc. The enterprise is engaged into the repair and prolongation of the term of technical adequacy of 5V27D and 5V28 antiaircraft missiles. Today, the enterprise offers such services as overhaul, modernisation, technical maintenance and current repair of a wide range of armament and air defence weapons at its cantonments. Alongside with traditional servicing radio electronic armaments, the enterprise offers the modernisation of weapon samples, possibly, in cooperation with others enterprises. The enterprise has successfully mastered the repair and upgrading of BM–21 combat vehicle of the Grad multiple–rocket launch system up to the level BM–21A Belgrad. The customer received modernised vehicles with new performance parameters, confirmed by proving grounds testing. 2566 Radioelectronic Armament Repair Plant JSC carries out an in–depth modernisation of the Osa (9A33BM2, 9A33BM3) combat vehicle […]
140 Repair Plant JSC was established on the basis of a mobile tank-aggregate repair plant – PTARZ No. 7, which was formed in May – August 1943 by the decision of the USSR State Defence Committee No. 3211 dated 19 April 1943. 140 Repair Plant started its activity on 7 May 1943. In July 1948, PTRAZ No. 7 was relocated to Borisov. In December 1948, PTARZ No. 7 was transformed into 140 Armoured Repair Plant. Under the Presidential Decree No. 597 of 30 December 2003, 140 Repair Plant republican unitary enterprise became a part of Goscomvoyenprom. On 18 January 2010, the enterprise was reorganised into 140 Repair Plant Open Joint Stock Company. Today, the principal directions of the company’s activity are: 1.The development and production of : the Cаyman armoured vehicle the GPM-72 tracked fire truck in cooperation with Pozhsnab LLC the T-72BME tank in cooperation with Beltechexport Company CJSC and Peleng JSC 2.The overhaul and modernisation of armoured vehicles, their components and assemblies for: tanks T-55, T-72, T-80 and their modifications infantry fighting vehicles BMP-1, BMP-2 and their modifications armoured personnel carriers BTR-60, BTR-70, BTR-80 and their modifications upgrading BRDM-2 to BRDM-2MB1 warranty and service maintenance of the vehicles repaired supply of […]
ALEVKURP JSC was established in 1996 as Scientific and Production Republican Unitary Enterprise, which was reorganised into an Open Joint Stock Company in 2010. The company is part of the Belarusian State Military Industrial Committee since 2007. The company specialises in R&D on modernisation and creation of new radar systems, weapon control systems using the advanced technologies for real-time digital signal and information processing, as well as microwave and intermediate frequency equipment with the use of the latest radio measuring tools, and in repair and antiaircraft armament modernisation. In 2005, ALEVKURP was awarded with the 1st National prize of Russia “Gold Idea” in the nomination “For Contribution to the Development of Export–Oriented Military Products” for achievements in the deep modernisation of the Pechora-2M SAM system as a part of IFIG (interstate financial and industrial group) Defence systems. In 2007, the “Kremlin” Fund under the authority of the Administration of the Russian Federation President awarded the enterprise with the “Golden Star” Prize for “For the Development of Air Defence Assets”. In 2013–2015 ALEVKURP JSC developed, manufactured and successfully delivered to a foreign customer the first domestic air defence missile system ALEBARDA. At present, the sales geography of the enterprise covers Africa, […]
Production of the prototype of the launcher’s main subsystems under Russian licence started in 1990 as well as the integration of all subsystems on the tracked vehicle.
Overhaul & Maintenance Air Depot (ZTC) is a jointstock company, mainly owned by the State, which carries out repair, maintenance and modifications of aircraft (fixed-wing and rotary wing), and aircraft components as well. ZTC is part of a rich 90 year history of the aviation in Croatia.
WERKOSGROUP is an engineering group specialized in development and production of multipurpose products for human shelter, securing of objects and material goods in peacetime and wartime including natural disasters.
VIKO is a footwear factory founded in 1946 and with our 65-years long history we are one of the oldest footwear manufacturers in Croatia. The factory was founded on the remains of old leather tannery that dated back for 300 years. During the last 40 years we have specialized in the production of professional and safety footwear for oil, forest, shipyard, construction, metal, electronics and other industries.
Varteks is the leading fashion company in Croatia with a 90-year-old tradition. Its 3,000 employees make it the largest employer in northwestern Croatia. Along with its own fashion brands Di Caprio M&W, Varteks International and Nomadic Denim, around twenty represented fashion brands are on offer at more than seventy stores throughout Croatia.
The limited liability company ULJANIK Special Production (ULJANIK – Namjenska proizvodnja d.o.o.) has been founded within the stock company ULJANIK Inc. that has 145 years old tradition in the field of shipbuilding.
The company TEHNOMONT-BRODOGRADILIŠTE PULA d.o.o. is the shipyard with tradition of over 100 years. It has been registered under its current name since 1991 and has, from its foundation until today, been engaged in the construction of vessels.
The company ŠEŠIR was established in the year 1866. in Zagreb, Ilica 29. where is still located today. Company initially started as a designer, manufacturer and distributor of men’s, women’s, and children’s headwear and accessories. Change of fashion and smaller demand for headwear turned company primarily to production of official uniform hats and caps for different professions.
The company ŠESTAN-BUSCH manufactures a line of plastic products and also composite products. In the field of military equipment the company produces ballistic protection devices, biological -chemical protection products, plastic parts and others.
SOKO Z.I. continues a tradition of the well-known aircraft industry SOKO Mostar. Established in 1995 in Zagreb with the task of providing marketing services for members of SOKO group, the company expanded its activities into the area of engineering in 1998, starting to build multidisciplinary research and development team.
The company SDT Sustav, besides production of the artillery fire control systems is dealing with GPS and GIS technologies as well as with weapon systems automatization. Example of application of the GPS technology is the production of base and rover GPS for application of differential correction in real time. Example of application of the GIS technology is computer aided military tactical map.
RIZ-Transmitters Co. is Croatian, Zagreb based company established in 1948 as a State controlled company for production of the Radio Broadcasting Equipment.
RIZ PROFESSIONAL ELECTRONIC Co. specialized for tactical military radio-communication was founded in 1963 as part of RIZ Co. The present RIZ PROFESSIONAL ELECTRONIC Co Ltd. (RIZ PE Co. Ltd.) is a newly constituted company, independent of the former RIZ, established in order to continue RIZ´s long tradition of producing military and public equipment, based on acquired experience and highly skilled staff. Development, design, manufacture, assembling, maintenance and servicing of all sorts of short wave and high frequency radio stations and equipment in the military frequency area, especially those produced in RIZ.
Ris Marine Ltd business since 2007. and in the short time we have realized great successes and our products have led to a high level of quality that is the primary characteristic of our products which is provide with wide palette of boats widespread across the Adriatic and beyond of our beautiful Adriatic Sea.
RedTech Ltd. – military diving equipment and education Company is specialized for production and distribution of military diving equipment-combat dry suits, buoyancy compensators, underwater dry containers, scooters, mixed gas air supply systems.
Company PROTEKTA d.o.o., Varaždin is a company for production and trade with devices, products and equipment for defence and protection from nuclear, chemical and biological (NBC) weapons in the narrow sense and for defence and protection from nuclear, radiological, chemical and biological threats and explosives in a wider sense for the needs of civil sector.
The Company owns a business building and few facilities of total area about 4.000 square meters, divided into: Development unit: Projecting and construction unit; Service and manufacturing unit; Gage laboratory; Workshop for equipping and servicing of special vehicles; Class-room; Library ;Apparatus shop; Tool room; Warehouse; Infrastructural plant
Pastor company business rests on a 70-year tradition in the production of fire extinguishers started in 1930 by Sreçko (Felix) Pastor. Today, the young and highly qualified management combined with experience and tradition is a formula with which, at the start of the century, we at Pastor are setting new standards so that our customers can get their money’s worth.
The Company consists of production facilities on 4500 m2 with all necessary infrastructure and educated employees for production of military equipment, for which we have all needed certificates and permits from the Government of Republic of Croatia. For the last 10 years Special Devices and Systems is a supplier for Ministry of Defence of the Republic Croatia.
In 1905 Šibenik became the Navy port of Austro-Hungarian monarchy and from that date the warships support started on this location.
“MUNJA” Joint Stock Company, the plant for production of batteries, exists as the only and the oldest producer of this kind of products in the Republic of Croatia, and originates from the year 1920.
Shipyard Greben Ltd. was founded in 1948. Today, the shipyard Greben exists as Montmontaža-Greben Ltd., it employs 150 employees and is completly owned by Montmontaža Group, one of the Croatian leading constructors of the industrial plants, buildings and infrastructure. Shipyard is located on the island Korcula in in Croatia, on the Adriatic Sea in the Mediterranean. The total plant area covers 50.000 m2 , 25.000 m2 of which are enclosed premises with all necessary equipment.
Metallic is a private company founded in Rijeka in 1981. Besides producing rocket launchers and parts for 40 mm grenades, the company is involved in car industry (Volkswagen), shipbuilding and stomatology. Tool workshop that follows the production is included, and modern technologies are being used. We have 26 employees qualified to ensure high quality of production.
Factory Lipik Glas, is situated in Lipik, in the northeast of Croatia. Traditionally, the factory was producing drawn sheet glass, profiled glass and pattern glass.
Kroko International is a family run business founded in 1961. At the beginning, the company was handcraft oriented and was producing leather products for fashion industry and various leather accessories. From the start the company was recognised by customers for high-quality products and make-to-measure projects. In the beginning of 1990’s when the war started, there was a strong demand of the market and the government for police and military products due to war circumstances. That was the turn-over point, in which the owning structure decided to make a swerve in the policy of running the business and started to produce police and military equipment. Naturaly, leather was the first material that was used to produce such products, considering that till that period, leather was most commonly used material for police and military equipment. Over some time, company engineers got the know-how for the specific products and have been introduced to new and modern materials that were easier to handle and more appropriate for special equipment than leather (e.g. Cordura, Nomex, Kevlar, various membrane materials…etc.). Thereupon a strong development occured, manifesting in the implementation of the new material and bringing new products to the market. Also, new products were designed for […]
Končar Electrical Equipment was founded in 1946. and it has been operating under present name since 1970. Today it’s production facilities operate on approximately 10.000 m2, with more than 100 employees, of which more than 40 have university degrees either in electrical or mechanical engineering.
Jadran Hoisery Factory Inc. was founded in Zagreb in 1930. Jadran, Inc. produces hoisery for women, men and children from natural and synthetic materials.
Jelen is the biggest Croatian manufacturer of military and custom made military, protection, working and firefighter footwear, with total annual production exceeding 200.000 pairs of shoes.
Division “LAIR” of the Ruđer Bošković Institute is a R&D organization specialized for research and development in the field of military photonics. The division can independently, in the scientific surrounding of Ruđer Bošković Institute, work on the R&D of sophisticated instrumentation for military purposes.
INsig2 is active in area of both ICT and physical security. We can design, implement, integrate and maintain the most sophisticated security systems. Our competencies cover good knowledge of principles of IT security governance, design of high tech physical security systems, integration between logical and physical security systems and maintenance.
INKOP, Industry of leather and footwear is located at Poznanovec. They process leather and manufacture footwear. The company began processing leather in 1919, and the first shoes were made in 1960. INKOP manufactures fashion and protective footwear and footwear for special purposes (military, police, firefighting, medical footwear).
HS Produkt is a company that manufactures pistols and rifles and is one of the best examples of how Croatia can largely contribute to the development of the economy, especially when it is a question of companies that manufacture military equipment and armament.
Design and development, implementation (adaptation and modelling) and after-sales services regarding support software for data acquisition and plant management of production processes and support software for maintenance management.
SEGULA Technologies is a consulting group with a global presence. It helps to boost competitiveness within all the major industrial sectors: automotive, aeronautics, energy, rail, naval, pharmaceutical and petrochemical. Present in 23 countries and with 80 offices worldwide, the Group fosters a close relationship with its customers thanks to the expertise of its 10,000 employees. A leading engineering specialist that places innovation at the heart of its strategy. SEGULA Technologies carries out large-scale projects, ranging from studies to industrialisation and production.
Was established as an ancillary company of the defence sector, formed by a team of professionals with over 15 years of experience. Since its inception, ITE has been oriented at leading projects and comprehensive turnkey services, including the design and manufacturing of equipment tailored to a customer’s needs. Using management techniques to ensure that our customers have a satisfying experience in their dealings with us and to ensure that it is easy for them to monitor their projects, we adapt to their needs.
The name In-Nova was coined to denote a “projects incubator”, given that it is an entity that promotes the development of activities right from the start and up to the prototype or demonstrator status.
IBATECH Tecnología S.L.U. is an engineering company that operates in the fields of CBRN defence, EOD, meteorology, communications and logistics, with extensive experience in design, integration, supply, R+D and maintenance related to the following:
Gahn is a firm specialising in the comprehensive management of entities set up to develop turnkey projects that require the participation of several companies established in joint ventures or consortiums. Gahn provides comprehensive services throughout the execution of a contract. These services include planning, technical control and monitoring, the development of management and control procedures; quality assurance; financial management; administrative management, legal and tax advising and logistics. Our services include the phases of bid preparation, the beginning of business activities, execution of the project and termination of the joint venture. Gahn participates in the management and coordination of diverse projects of the Spanish Armed Forces.
Everis Aeroespacial, Defensa y Seguridad (Everis ADS) provides global solutions for the implementation of critical systems. We therefore integrate reliable and innovative technologies either developed by us or by technology partners with whom we maintain strategic alliances.
BUQUELAND Empresa Europea de la Ingeniería de la Calidad, S.L. was founded as a company for the purpose of providing a comprehensive response to a very specific market function: ensuring the quality of metal structures, while staying true to our commitment to the environment and occupational risk prevention.
We are a global technology, engineering and innovation company. We offer solutions in installations and services with high added value, and we employ over 200 professionals. We integrate systems. Through the combination of energy, communications, electronics and information technology, we create solutions that apply to infrastructures, industry and unique buildings, thus providing a response to the needs of our customers in order to improve their development and guarantee their long-term sustainability. Over 20 years of experience and the knowledge our professionals have allowed us to develop innovative and effective solutions for our customers in the aviation industry, in major sports infrastructures, in the health sector, in the field of energy and in audiovisual systems.
GHENOVA is an international, multidisciplinary engineering and consulting company that operates in sectors in which a comprehensive solution is required. Our team –committed to quality and deadlines–develops and participates on large and highly complex technological projects for some of the world’s largest firms in the defence, security, naval, offshore, aeronautics, industrial, energy and infrastructure sectors.
CT Ingenieros provides engineering services to the aeronautical, naval and land sectors regarding defence. The portfolio of services covers the entire product life cycle: from design, product engineering and manufacturing engineering to the engineering of after-sales support. CT Ingenieros is a preferred supplier for product engineering services (E2S) and manufacturing services (ME3S) for the entire Airbus Group throughout the world. In the naval field, CT Ingenieros is a benchmark supplier in all of Navantia’s factories. With over 30 years of experience and technical expertise and more than 1,700 engineers, CT has a clear goal: providing innovative and technological solutions to help its customers become more effective and competitive.
Altran Spain is a company of the Altran Group, a global leader in innovation and technology consulting. Since 1992, it works with 150 leading companies in the main sectors of the country.
The HEMCO Ltd. is a protective garments and equipment manufacturer, opened in 1992 from the family Mihalj‘s own investment.
Geofoto is a Croatian company that offers photogrammetric, geoinformation, cartographic and cadastral services. The company began ope rating on September 1st, 1993 in Zagreb and its headquarter is in Zagreb. Companies were also founded in London (Geofoto London), La Paz (Geofoto Latinoamerica), Prague (Terra – map) and Belgrade (Geofoto Beograd) and there are branch offices in Osijek and Dubai (UAE) as well as sister companies Geofoto – International, Geofoto Air and Infomax. The main activities of Geofoto are aerial survey, digital photogrammetry, cadastral survey, production of topographic and cadastral databases, design and creation of geoinformation systems and solutions and digital cartography. Geofoto services are recognized through high quality, honest and transparent relationship with the client, strong IT structure and many years of international experience. For implemented quality control system Geofoto has the Certificate ISO 9001:2008. Spatial data and information are our core business so we place great focus on clients’ database security and protection. Our own information system, space and personnel have been certified to handle classified data. The Facility Security Clearance issued by the Office of the National Security Council enables the company to participate in national, NATO and EU classified tenders and thus strengthen the company’s position on […]
Faculty of Electrical Engineering and Computing is an educational, research and scientific institution. The Faculty is a leading research-led institution and undertakes research at the highest levels of international standing. The Faculty offers a broad spectrum of services to business and industry, from research and consultancy to conference facilities, training and graduate recruitment.
Total customer solutions including Business Consulting, Network Design, Implementation and Integration, Network Support, Network Performance Improvement, Enhanced Network and Application Network Management are offered.
Design, manufacturing and distribution of mountain and camping articles (rucksacks, sleeping bags, insulating mats, camping tents, garments, footwear and other leisure time complements) for athletes and professionals (Ministry of Defense, forestry workers, firefighters, security forces and others).
Tyco Integrated Fire and Security, a Tyco company, designs, installs and maintains fire protection systems and electronic security systems for residential, business and government customers. The portfolio of Tyco Integrated Fire and Security includes anti-intrusion alarms, video surveillance, access control, electronic protection of articles, radio identification, fire detection, integrated solutions and supervision. The solutions of Tyco Integrated Fire and Security are used to help protect people, assets and property.
Founded in 1923, Textil Santanderina is a vertically integrated textile company, therefore including processes ranging from the raw material to the finished garment: spinning, weaving, dyeing, printing, finishing and manufacturing of the finished garment. Its products are designed for various sectors, such as fashion, the automotive industry and technical textiles (PPE), as well as protection for special units, such as armed forces and the police. Its high production capacity and its completely equipped laboratories, together with the diversity of the fibres used, make the company a benchmark in the world of textile manufacturers.
The Company’s purpose is to provide and develop the following services and activities: – Security and protection for goods and establishments. – Installation and maintenance of security devices and systems. – Operation of centres for the reception, verification and transmission of alarm signals and the consequent communication thereof to state security forces and agencies. – Planning and advising on the security activities considered in Law 23/1992 of 30 July, on Private Security, and/or subsequent laws that could modify or repeal this law. – Installation and maintenance of fire protections systems.
TALLERES MATEU SUCESORES, S.L. is a family business that was founded in 1962. We are a company in the metalworking sector, engaged in the manufacture of industrial boiler manufacturing using any type of steel and alloys, in addition to mechanical constructions, machining, engineering, design and development. TALLERES MATEU’s commitment to quality covers all levels of the company, such that the entire collective effort is directed at satisfying the customer’s requirements.
Securitas in Spain. A global leader in security solutions, Securitas is consolidated as one of the leading companies in the private security sector in Spain.
Saima Seguridad is a Spanish company engaged in providing comprehensive hightech solutions for protecting individuals and their assets according to the market’s needs. Its specialised and exclusive activity within the security sector is its dedication to electronic technology, which makes its efforts more effective. Experience of over 25 years in various sectors such as banking, critical infrastructures, defence, etc. We provide solutions and technical knowledge for resolving all of our customers’ needs, thereby obtaining the expected outcomes. Comprehensive solutions for the implementation of new systems and maintenance for those that already exist.
Founded in 1958, Sagres-Partenon is a company engaged in the production of technical clothing for security forces. As a result of using the most modern technologies, Partenon’s garments are notable for offering the highest performance regarding both technical parameters and aspects related to design and comfort. All of this, together with a wide range of services, makes Partenón’s garments a guarantee of quality. Our competitive advantage is based on our culture of proximity and commitment to customers, thereby generating innovation and creativity. Our products and services are backed by the company’s values, which focus on customer orientation, innovation, renewal, teamwork, trust, transparency, service and quality.
A security company officially approved by the Ministry for Home Affairs for the following activities:
Papí Tránsitos, S.L. is a freight forwarder providing global logistics and worldwide transport solutions for IMO and military goods, with over 45 years of experience and ISO 9001 certification. Our company is registered with the Directorate General of Military Equipment and Materials of the Ministry of Defence, and we offer road freight, sea freight and air freight services for these type of goods, therefore coordinating all the logistics from the factory to the final destination and assuring that all legal procedures are fulfilled regarding escorts, transit permits, port security, etc. For these matters, we have in-house security advisers who analyse and study each shipment to guarantee the most cost-effective solution for each case.
Since 1987 we have been a freight forwarder offering door-to-door service from pick-up at the source to final delivery, using all possible routes (air, sea, land and rail), for both imports and exports and including customs management, insurance, warehousing and distribution. As also specialized in transportation from the USA and ASIA where we have our own consolidated. We have accreditations by the IATA, FETEIA, the FDA, AMCHAMSPAIN, AECOC and GS1, which are needed for all procedures and requirements to obtain the result of a job well done.
Design, manufacturing, repair and assembly of special equipment and tools. Manufacture of equipment for the detection of mines and other components, with hyperspectral imaging and analysis in real time, in addition to the development of modular, airborne water treatment plants.
Mecánicas Bolea, a firm with over 30 years of experience in the repair, maintenance and manufacturing of equipment, has the Spanish Ministry of Defence among its regular customers, for which it has worked at the Military Arsenal of Cartagena and on ships of the Spanish Navy and ships of the NATO fleets. MB also manufactures and assembles equipment on the S-70 and S-80 submarines with Navantia and on the Scorpène submarines for Navantia and DCN. Mecánicas Bolea has also worked for the Albacete Air Base, manufacturing parts and tooling for the Airbus Helicopter and the F-18. To perform these jobs, it has the required certifications, such as the following: PECAL 2110, ISO 14001, ISO 9100, ISO 9001, ISO 3834-2, OHSAS 18001, STAMPS U and R, MODULE H1 for pressure vessels, etc.
Mecánica de Precisión Tejedor, S.A. provides the full range of CNC machining, including machine-welded assemblies and the assembly thereof for the military industry.
Manufacturas Aura is a company in the service sector, and it is 100 % Spanish owned. We have over 20 years of experience and presence in various markets. We offer products and services that respond to the needs of our customers in both the public and private sectors. Our main business activity is the manufacturing and distribution of canvas for military vehicles and field tents, in addition to military gear, uniforms in general and accessories. We also handle all areas related to health, civil protection, mobile units, sports materials, uniforms, personal protection, climbing equipment and emergency materials. We have another business line in the private sector related to department stores.
Tecman is a company specialising in the maintenance of equipment and facilities and in industrial repairs, assembly and supplies.
MTorres is an industrial group that is qualified in advanced technologies in order to develop highly complex, innovative solutions for the automation of industrial processes in the aerospace and converting sectors. The aeronautics division is engaged in the design, manufacturing and installation of special machines and tools for the manufacturing of aerospace components, as well as tooling and assembly systems for those machines and tools. MTorres’s products cover the entire production process, from the manufacturing of individual components to assembly of the final product, in metal and composite materials. The company’s products are present in over 70 countries, with more than 620 customers. With over 700 workers engaged in R&D&i activities at centres in Navarra, Murcia, Madrid, USA, Germany and Brazil, the group reinvests 10% of its turnover in R&D activities.
Integra International is a 100 % Spanishowned logistics operator, with an international outlook and specialising in the development of integrated logistics solutions with any level of complexity. It is an innovative, customer-oriented company with a highly qualified team, led by professionals with over 25 years of experience and in-depth knowledge of the logistics sector. With offices in several of the main Spanish airports and ports, both Integra International and its customers and partners have broad geographic coverage in strategic markets all over the world. Moreover, Integra International has all the necessary security clearances for responding to the logistics needs of the defence industry.
Inabensa Abengoa (MCE: ABG.B/P SM/NASDAQ: ABGB) applies innovative technology solutions for sustainable development in the energy and environment sectors, in which it generates electricity from renewable resources, transforms biomass into biofuels and produces drinking water from seawater. Inabensa Abengoa designs and manufactures equipment such as command and control consoles, interconnection harnesses, control and interface boxes, test benches, EGSE and on-board electronics, in addition to electrical rooms and modular units with leak-proof enclosures, therefore integrating and interconnecting all types of units: low-voltage panels, motor control centres, medium-voltage cabinets, power panels, computer equipment, batteries, transformers, etc.
Manufacturer of military technical fabrics, camouflage nets, field tents, truck tarps, seat canvas and material protection canvases. References: gamma-2 IR khaki, truck tarpaulins 824, tent canvas 884, seat canvas 826, NATO IR gamma-0 green tent canvas.
Design, manufacturing, assembly and startup of and technical assistance for turnkey projects of equipment, tooling, industrial facilities, special machinery and prototypes. Fabrication and welding of large structures and machining in general. Sectors in which the company is engaged: aeronautics, automotive, tyre manufacturing, naval, railway, defence, energy, etc. Welding of railway vehicles and components according to EN 15085-2. Officially approved level II inspectors in magnetic particles, penetrant inspection and visual inspection in accordance with UNE-EN 473. NACE level 1 coating inspectors.
“ĐURO ĐAKOVIĆ” – SPECIAL VEHICLES company limited by shares has earned its reputation as a factory for production of armoured battle vehicles.
Company ĐĐ Aparati Inc.operates in the group ĐURO ĐAKOVIĆ HOLDING Inc. the company was established in 1970, in the engineering field. The production of Đuro Đaković Aparati Inc. includes: BREATHING DEVICES, HIGH PRESSURE VALVES AND FITTINGS, MILITARY PROGRAM
The Company ĐURO ĐAKOVIĆ Alatnica Inc. in Slavonski Brod was established in 1921, and today has 155 employees.
DOK-ING was established in late 1991, and registered for the production of robots and equipment for special purposes. Today, DOK-ING is the largest comercial humanitarian demining company in South Eastern Europe and one of the international leaders in the production of machinery for landmine & EOD clearance.